6m Copper Mesh Rats Mouse Control For Wildlife
Copper Mesh Rats Introduction
Copper knitted wire mesh products for industrial, especially Copper
Gas Liquid Filter for cleaning and filtration. Copper knitted wire
mesh's biggest advantage is its unique construction. Knitting
produces an interlocking-loop pattern. In this configuration, each
loop is an integral part of its neighbors with each supporting the
other. When a mesh or mesh element is compressed, stretched or
bent, and provided that exertion is not past the material’s yield
point, this integrity allows the element to spring back to its
original form.
Copper Mesh Rats specifications
| Product Name | Copper Knitted Wire Mesh | Key Words | Knitted Wire Mesh |
|---|
| Material: | 99.9% Copper Wire | Wire Type: | Round Wire, Flat Wire |
|---|
| Mesh Width: | 4in, 5in, 6in, As Per Order | Other Name: | Copper Gauze |
|---|
| Mesh Status: | Plain, Or Crimped | Strand Number: | 1, 2 Or 4. |
|---|
Copper Mesh Rats Application
1. Copper mesh for Wildlife Stopper
Copper mesh for wildlife stopper can control the animal ,for
example snake ,rodent ,the most important is give you a security
environment ,at the same time keep green ,because it is Rohs
material .
2. Copper mesh for screw cleaning.
Steps to clean the screws and barrels efficiently with copper gauze
and grease.
Step 1: Use a purging compound to clean the extruder. Then use
small ball of copper mesh with some silicone grease on it to clean
the die face. Also please clean the valve when it is still hot.
Step 2: Remove the die from the extruder head. It is best to clean
it by silicone coated copper gauze forced through the die with a
wooden dowel.
Step 3: Pull back and forth the copper gauze to complete the
cleaning after it pass through the die.
Step 4: Make sure that no residual trace of adhered plastic is
left, nor causing a scratch on the metal surface, so the die is
thoroughly clean.
Step 5: Remove the hot screw partly, wrap the copper gauze with
silicone coating 3 times around the screw, pull back and forth to
do the cleaning.
Step 6: Keep sliding the copper gauze when removing the screw out
of barrel slowly, until the screw is clean. It takes only 5 minutes
for step 5 and 6 operations.
Step 7: Wrap copper mesh at end of a long rod and pass it through
the barrel. Then, chuck the rod into power drill, insert fresh
gauze and pass back and forth through barrel until clean.
Step 8: Please do all the operations with silicone grease coated
copper mesh. Now all parts is clean and ready for reassemble
Copper Mesh Rats advantages
Copper has good electrical conductivity, thermal conductivity,
corrosion resistance and ductility and other physical and chemical
properties.Electrical and thermal conductivity is second only to
silver, pure copper can be drawn into very fine copper wire, made
into very thin copper foil.The fresh cross section of pure copper
is rose-red, but after the formation of copper oxide film on the
surface, the appearance is purplish red, so it is often called
copper.
